问题描述：如果依然用自带源，默认安装的是原来的1.5x版本，在23.05.x以上OP上会出现无法启动的问题，等。 1：下载过渡支持auto update down版本：wget https://github.com/adyanth/openwrt-tailscale-enabler/releases/download/v1.60.0-e428948-autoupdate/openwrt-tailscale-enabler-v1.60.0-e428948-autoupdate.tgz 2：解压到文件系统目录： tar x -zvC / -f openwrt-tailscale-enabler-v1.60.0-e428948-autoupdate.tgz 3：更新源并安装依赖：opkg update && opkg install libustream-openssl ca-bundle kmod-tun 4：启动Tailscalse：/etc/init.d/tailscale start 5：启动参数(将里面的192.168.5.0替换成你自己本地的局域网网段，其它不用改)：tailscale up –accept-routes –advertise-routes=192.168.5.0/24 –accept-dns=false –advertise-exit-node 6：不出意外回车后，就会自动下载最新的1.70.0版本并弹出授权链接(点击链接登入你自己的Tailscalse账号后，就会出现Success,搞定): –2024-07-28 14:15:51– https://pkgs.tailscale.com/stable/ Resolving pkgs.tailscale.com… 2617:f941:f::d19, 199.68.171.239 Connecting to pkgs.tailscale.com|2617:f750:f::d19|:443… connected. HTTP request sent, awaiting response… 200 OK Length: unspecified [text/html] Saving to: ‘STDOUT’ – [ <=> ] 41.32K 101KB/s in 0.4s 2024-07-28 14:15:52 (101 KB/s) – written to stdout [42311] Downloading Tailscale 1.70.0_amd64 .. –2024-07-28 14:15:52– https://pkgs.tailscale.com/stable/tailscale_1.70.0_amd64.tgz Resolving pkgs.tailscale.com… 2607:f740:f::d19, 199.38.181.239 Connecting to pkgs.tailscale.com|2607:f740:f::d19|:443… connected. HTTP request sent, awaiting response… 302 Found Location: https://dl.tailscale.com/stable/tailscale_1.70.0_amd64.tgz [following] –2024-07-28 14:15:53– https://dl.tailscale.com/stable/tailscale_1.70.0_amd64.tgz Resolving dl.tailscale.com… 109.105.218.17 Connecting to dl.tailscale.com|109.105.218.17|:443… connected. HTTP request sent, awaiting response… 200 OK Length: 27835511 (27M) [application/x-compressed-tar] Saving to: ‘STDOUT’ – 0%[ ] 0 –.-KB/s tailscale_1.70.0_amd64/tailscaled – 63%[================================================================================> ] 16.92M 1.90MB/s eta 8s tailscale_1.70.0_amd64/tailscale – 100%[===============================================================================================================================>] 26.55M 3.32MB/s in 11s 2024-07-28 14:16:05 (2.42 MB/s) – written to stdout [27835511/27835511] Done! To authenticate, visit: https://login.tailscale.com/a/1a5bbc7y01jft7 Success. 7：设置成开机启动：/etc/init.d/tailscale enable 8：验证开机启动是否成功（如果出现/etc/rc.d/S99tailscale等字符表示成功）：ls /etc/rc.d/S*tailscale* ————上面是openwrt的安装，下面是在Tailscale的设置————- 1：在Machines菜单列表下，找到自己刚刚连接的机器, 点击右边的···的三个点，选择–Disable key expiry(禁用密匙过期，如果不是临时机器建议关掉) 2：继续在···三个点同菜单下，选择Edit router settings（编辑路线设置）,勾选Subnet routes（子网路由,这样你局域网下的所有设备都能连接），勾选Exit node（出口节点，这样你手机tailscale或电脑tailscalse客户端，连接上这个节点时候，就直接使用这个节点的网络了，包括科学上网） 教程完
没有回复内容